How To Install Wedding Cake Pool Stairs?

The installation of wedding cake steps in an above ground pool involves several steps. First, choose the right steps that are compatible with your pool’s aesthetics. Next, locate the reinforcement parts that will secure the steps and install foam pads under each. Fill them with pea gravel and secure the gravel with plastic caps.

Step 2 involves positioning the steps securely on level ground in your pool. Ensure the steps are evenly spaced and aligned for stability and aesthetic appeal. A popular style is the wedding cake stair, named for its rounded tiers. Lumi-O InnovaPlas is a manufacturer of pool steps, ladders, and lighting systems for both inground and above ground pools in Canada, the United States, and Europe.

The design and construction of steps for stairs into the shallow end and recessed pool stairs shall be in accordance with Sections 610.5. 1 through 610.5. 6. No weights are needed as ballast, and removing and installing the step each season is quick and easy.

The popular Wedding Cake Steps are back and blue, holding over 500 lbs and there is no need for extra weight or ballast. To maintain the steps, follow proper instructions and ensure they are securely installed.

In summary, the installation of wedding cake steps in an above ground pool requires careful planning, preparation, positioning, and secure installation.

How to fill pool steps with sand?

Use the funnel to put sand in the step, filling the holes until it reaches the top. Don’t fill the steps near the pool as this can cause sand to enter the pool. Cleaning sand out of your pool is hard. Fill the steps close by and move them to the pool when you’re done. Close the holes with the caps. Once the holes are closed, put the stairs in the pool. If the steps float, add more sand. If the sand won’t settle evenly or fill the steps, drill more holes in places the sand didn’t reach. Then fill the new holes with sand and make sure they are covered and watertight before putting the stairs back in the pool. Do this only if you can’t find another solution.

What can I use instead of a pool ladder?

You can also use footholds built into the pool wall instead of ladders. (Think rock climbing crevices that are smoother and safer.) They are more expensive than ladders, but they are safer. If you’re considering a built-in option, go for the pool steps! They look better and are more versatile. Pool steps. This is where your backyard pool will really stand out. If your pool is already built and has a ladder, you can add a wedding cake step for easy access for young swimmers. This removable step structure is like a wedding cake, with the smallest step closest to the water and the next ones wider. They have non-skid treads for traction, so it’s easier to get in and out.

How much weight to hold down wedding cake pool steps?

Yes, you can! We use the “wedding cake” steps in our above-ground pool. The manufacturer says to put two 50-pound bags of sand in the space inside the bottom step, but we don’t like that method. The tubes in the cubby hole have nylon ropes attached. The ropes are tied to the plastic ties. To remove the steps at the end of the season, we first unhook the tubes. This lets us move the steps away from the pool wall. We then gently tug on the ropes, free the tubes, and pull them out. The steps are now floating and can be lifted out of the water. No one has to get in the water to do this! You may have noticed the holes in the bottom and sides of the steps. We cut two holes to let water flow through. Algae grow in the empty space under the steps because there isn’t enough moving water there, even with the holes. When I brush the pool, I push the brush near the holes to get water into them. This has made a big difference in keeping that area clean. For more pool care info, visit Ben Powell’s Pool Forum. Using the BBB method has saved us hundreds of dollars and allowed us to enjoy our pool this summer. Bleach, baking soda, and borax—it’s that easy!

What can I use to hold down my pool stairs?

3. Use sandbags. If you can’t put sand in the pool steps, use sandbags instead. Hubert Miles says some pool owners use sandbags around the base of the steps to make them stable and prevent movement. The sand bags need to be waterproof and sealed. You can buy purpose-made bags, like this Blasoul universal pool ladder and step weight from Amazon. Put them at the bottom of the ladder and add as much weight as you need to keep it stable. You may want to remove sand from the pool steps when you winterize the pool. The weight holding the steps down can be hard to lift. Vacuum out some of the sand with a wet vac to make them lighter and easier to remove from the pool. A pool ladder mat protects the pool liner and provides a non-slip surface for safe entry and exit. A pool ladder mat keeps the ladder in place.

How to attach weights to pool stairs?

I drilled holes for water circulation and made weights from PVC pipes. Three were filled with sand, and two with concrete. I put the steps in the pool and attached the weights with cable ties. Here are the steps after removing them from the pool. You can see the weights and sand on the bottom steps to help them stay stable.

Edit: We have the same pool, 28 ft. version. Welcome to TFP! For pool care info, check out our free Pool School. If you need help, register and ask us here in the forum!

How to secure pool stairs?

To keep pool steps from floating, add 70 lbs. of sand during assembly. This will sink the steps to the bottom of the pool.

How to keep wedding cake pool steps from floating?

Slide it in. Put your coupler on the side. Slide it back into the other side. This is how we’ll hang the four-inch PVC pipe. Use it.

Do you need a pool ladder mat?

It’s a good idea to use this extra protection for your liner. Over time, liners have become thinner and more prone to rips or tears. Confer Plastics doesn’t sell liner protector pads. You can find them at many online and local pool stores. A cheaper alternative to pool liner protectors is a bath mat, which you can buy at most department stores.

Is a pool ladder necessary?

All pools must have a ladder or steps in the shallow end if the water is more than 24 inches deep. In private pools with more than 5 feet of water, there must be ladders, stairs, or underwater benches/swim-outs in the deep end. If diving equipment is used, benches or swim-outs must be recessed or in a corner.

Exception: In private pools with more than one shallow end, only one set of steps is needed. You can use a bench, swimout, or ladder at any additional shallow end instead of another set of steps.

How deep should pool steps be?

The treads must be at least 11 inches deep.

The design and construction of steps for stairs into the shallow end and recessed pool stairs must comply with Sections 610.5.1 through 610.5.6. The risers at the centerline can be up to 9 inches (229 mm) high. The bottom riser can be taller than the others. The vertical distance from the pool coping, deck, or step surface to the uppermost tread shall be no more than 9 inches.

Do I need a mat under my pool stairs?

It’s a good idea to use this extra protection for your liner. Over time, liners have become thinner and more prone to rips or tears. Confer Plastics doesn’t sell liner protector pads. You can find them at many online and local pool stores. A cheaper alternative to pool liner protectors is a bath mat, which you can buy at most department stores.

How do you secure an above ground pool stairs?

You need about 150 pounds of sand. If so. A hundred pounds of sand is a hundred. You’re good. They’ll still bounce a little.