What Would You Do With The Damaged Grooming Equipment?

This comprehensive guide provides tips on maintaining grooming equipment, including clippers, combs, and blades. It emphasizes the importance of proper maintenance to prevent issues such as poor clipper function, slower grooms, uneven cutting, and costly repairs. To maintain your grooming supplies, follow these steps:

1. Clean your clippers and blades regularly, removing old ones and blowing out debris. Insert new blade drives and replace screws when necessary.

2. Adjust the tension of your scissors by testing the tension by holding them by the thumb ring with your left hand and opening the blades to a 45-degree angle.

3. Brush your husky’s coat regularly, using shampoo and conditioner, a shammy or cloth to wash the dog’s face, and ear wipes or an ear cleaning solution.

4. Use a sturdy brush for your cat’s coat, especially if they have long hair. Show respect to your groomers and avoid damaging their hard work.

5. Maintain the correct temperature for trail grooming, between 23º F and -5º F (-5ºC). Bleach should be used in moderation, as higher concentrations can cause paw burn and lung damage.

6. Choose clipper blades with various lengths, as some dogs require shorter or longer coats. Choose blades that can be re-sharpened and are suitable for different breeds.

7. Brush double-coated dogs regularly to remove dead hair and promote healthy growth. If your dog has a double coat, use a deshedder before brushing.

8. Clean your tools with a dog-friendly sanitizer to remove build-up and prevent damage.

9. Regularly clean and maintain grooming equipment to prevent rust, corrosion, and other forms of damage that can shorten its lifespan. Oiling dog grooming equipment can also help prolong its lifespan and performance.

How to store grooming scissors?

Tip 4. Storing your dog grooming scissors safely.. To store clean dog grooming scissors, firstly you must ensure that each pair of scissors is closed and keep them in an area where it is dry, out of the sunlight (when we have sunshine) and somewhere safe. I would also advise to cover the scissors with either a dry towel or sheet. This will keep any stray dog hairs, dust and moisture, away from your precious dog grooming scissors.

Tip 5. Ensure your dog grooming scissors are sharpened.. To maintain a dog grooming scissors performance, ensuring that the scissor is serviced and sharpened, it vital. All dog groomingscissors are given an extremely sharp edge at the point of manufacture. This sharp edge will naturally blunt over time. However, there are a number of factors which can cause dog grooming scissors to blunt quickly. Having your dog grooming scissors serviced and sharp will maintain your scissors longevity and keep your scissors performing at their best. More information on our professional dog grooming scissor sharpening service.

How to clean a grooming table?

Look after your table well to extend its lifetime. Poor care can significantly shorten a tables life, especially for electric models (motors and fur dont mix – same with clippers and dryers). At the end of every day, blow or brush all fur off the table-top, wipe it clean and dry it. Take extra care to blow or brush out fur from under and around table legs, the motor and pedals, especially around any moving parts to reduce the fur entering the mechanics.Wipe and keep the table dry to avoid rust or stains, paying attention to any stainless-steel parts such as the grooming arm (stainless steel is rust resistant, not rust proof). For hydraulic and electric tables, return them to their lowest position at the end of every day, or when being stored for longer periods.

How do you store grooming blades?

How to store blades. Clean the blade thoroughly then oil before storing. Store in a cool, dry place. Heat, moisture or humidity can cause a blade to rust if not protected by oil. If storing for long periods of time, make sure to use a heavy hand when oiling, and store in an air-tight container or zip-lock bag for maximum protection.

Product=andis-folding-blade-pouchThis unassuming little folding storage case is actually one of our best selling products! Its a soft folding case – the best alternative to a bulky hard case for storing your blades safely. Holds nine blades each with their own see-through pocket. Padded canvas with secure velcro-closure. Completely portable. Folds flat for storage. Easy!/product.

Product=shernbao-22-blade-storage-caseThe Shernbao 22 Blade Storage Case is a great way to keep your clipper blades safe and organized. By providing a dedicated storage space for each blade, these cases help to prevent damage and make it easier to find the blade you need. Whether youre a professional groomer or a pet owner who grooms at home, keeping your blades safe and easily accessible is important. The 22-slot case offers six slots for wide blades, as well as 16 slots for other A5 or 5-in-one style blades. The premium quality hardback zippered case finished in an aesthetic carbon fiber material with a handle making it easy to move around. /product.

How do you clean grooming blades?

Cleaning blades thoroughly should be done after each dog. To avoid doing this during grooming time, keep several of each blade length on hand and put them aside once used, and pick up a fresh one. Clean them all at days end. Put newspaper or paper towels on your table or a counter, put all the blades you used on it. Grab a 16 ounce jar of blade cleaner – there are several kinds to choose from and all seem to work well in my experience. Clean excess debris from blades with a toothbrush or similar tool and put the blade on a clipper. With the clipper running immerse only the teeth of the blade into the liquid and run for 10-20 seconds. Lift out, wipe blade (unless instructions say it requires a longer contact time), lay down on newspaper or paper towel. Hold clipper in a downward position – if blade cleaner should get into the housing which is possible on some models, it will NOT go well for the clipper. Do next blade. When all are done, they should be wiped again and oiled. While many of the blade wash products do provide some lubrication, the viscosity is different than blade oil and cant be counted on to lubricate correctly. Since the blade is off the clipper you can do a more thorough job oiling. Pick the blade up and slide the cutter 2/3 of the way out from under the tension spring (the humped metal piece that holds it in place) and place a drop of oil on the cutter and on the comb blade, on the inside where theyll meet. Push the cutter 2/3 of the way out the other way and repeat the two drops of oil. Push the cutter back into place – now much easier since its lubricated. Be careful not to push the cutter all the way out, it isnt easy to get it back in again.

Its much faster to keep several sets of the same blade lengths in use so that you use a blade on one dog and then put it aside for cleaning later, but another method is to use one of the blade cleaning product in a spray form, such as Andis Blade Care or Top Performance Extend-a-Life. Spray on the blade while running, wipe, oil all with the clipper running (and pointed downward).

Expending a little time and a few inexpensive products can mean easier, faster clipping for you, safety for your four legged clients and reassurance to your two legged clients that their pet is in good, caring hands.

How to clean dog grooming blades?

Thats where all of the dander. Anything in the dogs coat any bacteria they may have had in their coat is going to be in between those teeth.

How to clean pet grooming tools?

Cleaning Brushes, Combs, Scissors and Nail ClippersStart by removing any hair that is caught in the brush or comb.Fill a sink or small bowl with hot water and add a small amount of antibacterial soap.Leave to soak for 10-20 mins.Once soaked, remove them from the water and use a soft cloth to dry them.

Home / Dog Grooming Tools: Cleaning & Hygiene Guide.

When using clippers regularly or for a long period of time it is recommended to renew your blades.

To keep your best blades in top condition, it is also advised to use aWahl Blade Ice Sprayon the blade. Simply spray through the blades occasionally and you will notice reduced friction and blade wear without leaving a heavy residue of oil. The spray will cool, lubricate, clean and disinfect clipper blades while they are being used.

What is maintenance grooming?

A maintenance dog groom is a great way to keep your pup looking and feeling great in between having a full dog groom.

• Full brush out to remove tangles/matts and loose hair and dead skin
• Bath with specially formulated shampoo depending of the skin and coat type of your dog
• Scissor tidy around face and feet
• Nails trim and pad clean/clear
• Ear clean
• Spritz of pawfume/cologne
• Cuddles

Prices vary based on the breed, size of the dog, coat type, condition of the coat, and the dogs behaviour. Get in touch to discuss further.

Why is it important to clean dog grooming equipment?

How do I sterilise tools in my salon?. Grooming tools must be cleaned between appointments to prevent germs and bacteria from being transmitted from dog to dog. As youll need your tools clean and ready, its always useful to have spare scissors, brushes and combs to hand so youre not stuck cleaning your tools after every appointment.

However, it would help if you were cleaning your equipment multiple times per day and here are our top tips on how to do it:

A UV sterilisation unit is a great addition to any grooming salon. Use it to sterilise your combs, brushes and clipper blades between appointments. It is simple and safe to use and kills all known bacteria and microorganisms quickly and efficiently.;

How do you clean grooming scissors?

Making sure that theres no hair or no debris. Sitting in the blades that could be ruining. Them then after you do this you want to submerge. It in a scissor solution so we would recommend barbicide.

How should dog grooming equipment be stored?

Storage containers are really handy, as you can easily group things together. For items like clipper blades, a hard case is a great way to keep them damp free and organised. For your clippers the hard case is a great sturdy box that keeps your clippers secure.

Dont worry youre nearly there! Its time to store your clipping equipment away. But before throwing everything into the most convenient empty space, consider using some form of storage.This will help you keep everything organised, which might not feel like a priority but youll appreciate it when youre preparing for your next clip.

Were just mentioned about keeping everything hair free, but we cant emphasise enough how important it is. If you dont youll be greeted by a clipper and blades that you wont be able to use straight away because of corrosion. Clippers that arent cleaned after use will attract moisture. Moisture and hair determinates the clipper armature and motor. So, before storing your clipping equipment away, make sure the filter, clipper head and clipper blades are clean and dry.

Youll find everything you need over at Clipit Groomings Shop.

How do you maintain grooming blades?

How to store blades. Clean the blade thoroughly then oil before storing. Store in a cool, dry place. Heat, moisture or humidity can cause a blade to rust if not protected by oil. If storing for long periods of time, make sure to use a heavy hand when oiling, and store in an air-tight container or zip-lock bag for maximum protection.

Product=andis-folding-blade-pouchThis unassuming little folding storage case is actually one of our best selling products! Its a soft folding case – the best alternative to a bulky hard case for storing your blades safely. Holds nine blades each with their own see-through pocket. Padded canvas with secure velcro-closure. Completely portable. Folds flat for storage. Easy!/product.

Product=shernbao-22-blade-storage-caseThe Shernbao 22 Blade Storage Case is a great way to keep your clipper blades safe and organized. By providing a dedicated storage space for each blade, these cases help to prevent damage and make it easier to find the blade you need. Whether youre a professional groomer or a pet owner who grooms at home, keeping your blades safe and easily accessible is important. The 22-slot case offers six slots for wide blades, as well as 16 slots for other A5 or 5-in-one style blades. The premium quality hardback zippered case finished in an aesthetic carbon fiber material with a handle making it easy to move around. /product.