A Brides DJ & Uplighting is a wedding DJ company that specializes in weddings, making planning easy and fun. They have DJs in two locations: Cleveland, OH, and Asheville, NC. Prices start at $1,495, and they offer top-notch DJ services, photobooth rentals, and stunning uplighting to make your event unforgettable.
A Brides DJ is known for their unique wedding lighting ideas, including purple uplighting and anything that reflects your wedding inspiration. They also provide color mixing options, such as purple or purple uplighting, to enhance the ambiance. They also offer a variety of lighting products, including battery-powered, wireless DMX uplighting for DJs, preset colors for weddings, MusikMode, indoor and outdoor IP65-rated uplighting, and architectural uplighting.
Erie Wedding & Event Services specializes in creating a captivating atmosphere through uplighting, monogram images, and accent lighting to bring a magical ambiance to wedding receptions, cocktail parties, and dinner banquets. They use cutting-edge lighting effects to match any decor.
A Bride’s DJ is a go-to option for couples, with Robby & Diana and their team being quick to respond, knowledgeable in music, equipment, and DJ services. They are seeking experienced wedding DJs who understand the importance of a once-in-a-lifetime day.
A Brides DJ is a professional North Carolina wedding DJ company that gets to know their clients to provide a classy and fun experience. They can be reached at 828-407-3363 or via email.
📹 Lighting Tips For Wedding DJs (VERY IMPORTANT)
In this video, I give some very important lighting tips for Wedding DJs that I think every single DJ should know! So this one is a …
Do you have a band and a DJ at a wedding?
7. Bands can DJ. Right! Most bands also offer DJ sets from a band member. Even if you don’t book a DJ, you can still have dance tunes after the band has finished. It’s a great way to save space.
Wedding Band – Cons 1. Budget. A wedding band costs more than a wedding DJ. It costs more because there are more people to pay.
2. Space needed. You’ll need space for drums, a sound system, and at least three or four musicians. You’ll need at least 4 x 3 meters for a typical 4-piece band.
How does a DJ work at a wedding?
A great wedding DJ will also introduce the wedding party, toasts, and your first dance. They’ll keep the party going and let your guests know what’s going on.
Why do you need a DJ for your wedding?
The DJ/MC sets the tone for the wedding. The DJ/MC provides music before, during, and after the ceremony. The DJ/MC tells your guests when to stand for the ceremony. Your guests need to know when to sit for the ceremony.
Is a wedding DJ better than a band?
Should you hire a live band or DJ for your 2023 wedding? How do you decide? If you want a club or festival DJ atmosphere at your wedding or have a limited budget, choose a DJ. If you have money, love live music, and want the best wedding entertainment, hire a live wedding band. If you can afford it, book both. Wedding DJs and live bands can perform together perfectly at weddings. Wedding DJs and live wedding bands have pros and cons. You might not know which one to pick. If you’re still undecided, read on. After 15 years of experience, I know which is better: a DJ or a live wedding band. Does it matter which I book? Wedding DJs and bands can make any wedding amazing. Not all weddings are the same, so it matters which one you pick. Below are the pros and cons of each type of wedding entertainment. This advice is for events and parties too.
What is the formal name for a DJ?
DJ. Merriam-Webster Thesaurus, Merriam-Webster, merriam-webster.com/thesaurus/disc jockey. 5 May. 2024. Subscribe to the largest dictionary in the Americas and get thousands more definitions and an ad-free experience!
Who plays wedding ceremony music?
Wedding Ceremony Music: DJ vs. Live Musician. Most couples choose a wedding DJ or live musicians for their wedding ceremony music. A wedding DJ plays pre-recorded music, while live musicians perform live at your wedding. The right choice depends on the atmosphere you want, your venue, and your budget. Photo credit: Miller Miller Photography. Wedding ceremony music has three parts: the prelude, processional, and recessional. Prelude music is played while guests are being seated. Prelude music starts 15 minutes before the wedding ceremony. This music is usually relaxing to get people ready for the wedding. Processional music is played as the family, bridal party, groom, and bride enter the ceremony. Many weddings have different songs for each bridal party member as they walk down the aisle. The bride, groom, bridal party, and family exit the ceremony to recessional music. Recessional music is usually upbeat and celebratory. We’ve outlined a few tips to help you choose the right wedding ceremony music. Maura & Co. is a reputable wedding ceremony musician in the Hudson Valley and Tri-State areas. Music.
Is it normal to have a band and DJ at a wedding?
Has anyone rented a DJ and live band for a wedding? Yes! Many customers want a unique experience for their guests that only a live band and DJ can provide.
Live bands will make your dance floor more fun. The best bands will play any songs you want at your wedding. DJs can play any kind of music. Tips for DJs and live bands at weddings. Weddings last about six to seven hours. Music and entertainment make your wedding day fun for your guests. Many couples have a live band and a DJ at their wedding. Lindsay, a BVTLive! bride, had a beautiful wedding at The Bellevue with the Eddie Bruce Experience and DJ Jon Gill. Guests danced all night, with music from the band and DJ Jon Gill.
Do you give wedding DJ a playlist?
You have millions of tracks to choose from, but only a couple of hours to play them. DIY enthusiasts can manage their own playlist, but sometimes it’s not enough to get the crowd moving. Your Philadelphia DJ will keep your track selection going all night long while hosting and encouraging the crowd to have fun. Tell your DJ which songs you want to hear. This way, the music will be right for the party. Putting together a playlist requires a lot of decisions. Here are some tips for creating the perfect wedding or Bar Mitzvah playlist. Sometimes we love a beat so much, we don’t pay attention to the lyrics. Know what the lyrics say, especially if you know some guests will be conservative. Don’t play “Get Low” by Lil Jon & The East Side Boyz if you don’t want grandma to fall out of her seat.
Make sure the list includes many different genres.
Is a DJ OK for a wedding?
Not everyone likes live music. If you like different kinds of music, a DJ might be better. A DJ is cheaper because there are fewer people to pay. A DJ is different from a band at a wedding. They don’t put on a show. They read the room and choose the right track for the right moment. If you don’t like bands but want the energy of live music. A good compromise is to hire a live saxophonist, trumpeter, or drummer to play with your DJ. This brings the energy of live music while keeping the flexibility of a DJ’s playlist. When choosing entertainment, check out live videos and read reviews. Ask about the lighting. Good lighting is important for a great party, but it’s essential for a DJ.
What is a wedding DJ called?
We’re not just your DJ. We’re also your emcee. It’s a big part of our job. It’s also called your Master of Ceremonies. That sounds official! Let’s get to know each other. Hi! At our first meeting, we’ll listen to your needs and answer your questions. Have you been to many weddings? What made them fun or not fun? We’ll explain the different types of mixing our DJs can do and ask which you like. This is how we learn your style and what you want. What venue and room(s)? Is it outside? Do you need an extra speaker for your ceremony or cocktail hour? Some couples have unique activities at their wedding. Your best friend is singing an a cappella song before dinner. You may need a mic stand. These questions help us figure out what equipment you’ll need. We also show you a typical wedding timeline.
Before the wedding. Each couple gets an online entertainment planner to help with planning. This is great! It’s where you plan your playlists, timeline, wedding party names, etc. We teach you how it works, check in on your progress, and send you emails and tips. We also answer questions and give advice before your big day.
The week of. Time to set the details. We have a phone meeting the week of your wedding to go over your Online Entertainment Planner. You may need to make changes, add equipment, or elaborate on something. We’ll go over your music, dance songs, timeline, wedding party names, special requests, logistics, and answer any questions. This meeting is to make sure we have all the details right. After the meeting, your DJ uses your Online Entertainment Planner for your wedding.
What is a female DJ called?
DJanes — women DJs in countries that use grammatical gender. Celebrity DJs — well-known celebrities who DJ. In Western popular music, women musicians have achieved great success in singing and songwriting, but they are given much less representation than men DJs. This may be because few women work in audio technology. In 2013, Rosina Ncube wrote in Sound on Sound that there are few women in record production and sound engineering. She also said that 95% of music producers are male, and that although some women are successful, they are less well-known than their male counterparts. Most students in music technology programs are male. In hip hop, few women DJs and turntablists may be because most hip hop is made by men. Most top rappers, MCs, DJs, record producers, and music executives are men. There are a few high-profile women, but they are rare. In 2007, Mark Katz wrote an article called Men, Women, and Turntables. In 2010, Rebekah Farrugia said that the male-centricity of electronic dance music (EDM) culture contributes to a marginalization of women in these EDM spaces. While turntablism and DJing are different, Katz says that women’s use of the turntable is affected by men’s love of technology. Historian Ruth Oldenziel agrees in her writing on engineering. She says:
📹 Review – uplighting before and after!
✓ We are a DJ, Club & Entertainment Lighting factory that brings you Real Value with great quality at an affordable cost!
THIS! you’ve articulated a lot of the thoughts I’ve had but never really knew how to explain to other djs. Spencer’s gifts lighting is my new go to description. I’ve advocated wash lighting as an aesthetic preference forever now. And I’ve had photographers ask me not to use green because it makes the subject look like a witch lol
I loved Digital Dave’s setup so much after doing a few events with him that I went out and bought my own! I use a Chauvet Par9FX light on both speaker stands and DMX them together. I still use the auto sound mode but the DMX cord allows both lights to be doing the same colors and patterns at all times!
I am a lighting Tech and work lots of Weddings, Birthday Parties, Debutant Balls. I usually run the mobile gigs with a wireless DMX controlled setup with Luminair 4 on an iPad, or Chauvet Show express. I agree…Keep it classy and use minimal lighting in the beginning (up lights, a couple of movers for ceiling during cocktail hour and a RGB strip light set to “warm white and dimmed” on a stand to wash the dance floor. I save most of the dance lighting (Wash FX2’s, AdJ Rayzer with laser turned off) until all the formalities are done and the dance floor is open to everyone, then I switch everything over to party mode. I usually tell the photographer or articlegrapher if something special is coming like the ” Dancing on a Cloud” dry ice effect so the can prepare for it and know where the co2 fog machine operator will be. The lasers and Swarm FX 5 is used mostly for Parties,School dances, and Glow parties with haze. By the way the Wash FX 2’s work great for UV glow (black light ) party’s. Just of them in each corner can easily cover a 20 ft x 20 ft area.
So many good tips as always. I have a couple of the cheapie movers(made a article on my website) and I have to agree. I think they are ok for some parties, and for the roller discos I do, but you’re right they have small coverage area. I also mention in my vid that a better option might be the Chauvet Wash FX 2 rather than a cheap mover. Especially because the Wash FX will always work well as you upgrade the rest of the lighting. And they can even look good on some rockville totems. I didn’t know that about the red lights. Dots are pretty much a given, but I didn’t know about the red. Thanks for that! Also 🙌 Gary Vee. Lol
Great tips! Literally just had this conversation with a photographer. He was wanting to know what the norm is for our industry. I told him that lasers and derby’s are dated & if the DJ is using them ask him to stop/turn them off. He didn’t have lighting in his contract so he will be adding that since our conversation.
Great tips Nick! Thanks for sharing! First time viewer! Always watch and check out other DJ’s websites to get ideas on lighting, equipment, other tips and tricks that might make things better, easier, and more exciting that I can incorporate into the show! Always evolve, right? Lol. That being said, it’s a shame that some people dis other DJ’s equipment, lighting, etc., when we’re all trying to do the same thing for our clients! Create that exciting environment with light and sound, and be the best DJ/MC we can be! Different people have different ideas when it comes to lighting, and not necessarily wrong, just different! I think that’s why we’re always looking for a different unique set up, lighting, that sets us apart, and/or gives us a different look! It still should be all about the clients, and their needs/wants though! Was going to add a lot more here, and where I appreciate your insight, you just gotta do you and get the best equipment you can afford at the time when starting out! If happens to be gig bars (Yes I bought one of those as well unfortunately – Lol), or a laser (maybe the Chauvet Scorpion Dual RGB, instead of the infamous red/green dots) layered on top of wash fixtures for effect, then you have to do what you gotta do! It’s always great to be able to bring in the team as well for lighting, etc., but that depends on how much you want to make individually, and/or the area you market yourself in, or even the type of events you do (maybe all you do is higher paying gigs, I don’t know, but sometimes you gotta pay the bills!
Great article! I have had some problems with djs lighting during the first dance when they use the spot light two bright on the couple, I don’t get it why many of them instead of power down the light to avoid dazzling the couple, they prefer to shine the light from the waist down. Then all the photos of the couple turn out with an ultra bright blowout dress and their faces two dark.
Damn good article man!! I’m halfway through and I have laughed out loud 3 TIMES!! I touch base on this because it can be hard to do, so I’m very excited to finish and watch more!! Love the style of your teaching and super informative without making me want to smack my head really hard,, on my pillow!! Great humor, energy and passion!! Thanks dude and keep up the great work 🙂 Ok back to learning!!
First thing I learned was the tickle your pickle. I recently bought D-fi xlr from chauvet to run my chauvet 355 irc lights wireless. I use adj airstream so I was planning to update my scenes. This color advice couldn’t come at a better time. God knows how many tomato faces I created. I will say at least I had the common sense to turn lights during dancing. Just getting through formalities is more than my brain can handle. Thanks for the tips.
Nice article. In addition to the laser points, does anyone remember those tacky fire lights from a few years ago?? I had a few local DJs using them a few years ago – such an impressive light show LOL. And I agree, when most DJs have intells lights they usually simply put them in one auto mode the ENTIRE night.
A lot of the issues lighting can cause for a photographer or articlegrapher has to do with exposure, quality of lighting, and color temperature. A good photographer knows that a very large source of light as close to the face subject as possible provides the softest shadows and the best lighting for portraits. Basically, the exact opposite of what a spot light is. When it comes to “natural lighting”, this is gonna come from getting close to large windows. Also, getting the subject the right brightness in comparison to the background (one stop higher to be precise) is huge. It keeps everything properly exposed and within the appropriate range of brightness. By adding spots and washes, you’re now exaggerating the difference between the bright and dark areas of the room, making it harder to get a properly exposed image. And finally there’s a color temperature issue as well. When taking photos or article, you want all light in the room to be the same color. You want it to have the same amount of orange, blue, magenta, and green. If you go really extreme with the color and use it to back light or side light, it can come across as an effec (which is what it is supposed to be doing). But the closer it looks to a normal light, the more it can really make a photo or article look funky. Just in case you were wondering the specifics of what you’re actually putting the photographer through, these are the first things that come to mind.
You briefly mentioned introductions for a wedding. I do a lot of middle eastern events. For us, the weddings are hyped and the couple come to the dance floor and invite all the guests to join them and get it hyped. With American weddings, I tend to go high energy entrance straight to the first dance. What do you usually do?
i’ve got those $80 chinese movers. wash on one side and spot on the other. mounted to the tops of my speakers- 4 movers/4pars. a pair of hemisphere on the floor in front of them and 20 h1 up lights. hazer when allowed to use it. all controlled by SoundSwitch. all depends on how you use them – so your advice was spot on..EXCEPT i expected you to say the worst color is GREEN. i always use shades of magenta (red+blue) and only green to make cyan and yellow. color theory of light: red+green = yellow (amber) blue+green = cyan red+blue = magenta RGB -> White = light /additive CMY->Balck = paint /subtractive so the pastels generally are created with the CMYK color pallet which you need to convert to for lights. auto programs are almost always RGB and look terrible as you say. and not only is too bright a problem, sometimes too dark is too. it’s not safe if your lights go total black out and there’s no ambient light.
I still see a lot of dots and mushroom designs at weddings. We s,so prefer the wash effects. We’re primarily a wedding company. Yup…if your a house party dj, you can let it fly. They also KILL THE PICTURES. We have 4 of the Chauvet Hybrids. Of course we have the wireless up lights and the Showven sparklers.
You actually felt our buttholes? Eeek!! Bwahahaha Seriously though, FULLY agree on using wash lights only. There was a time back when I first started in 1997 and throughout the mid 2000s, that I had all those dot/shape lights + lasers on a big ridiculous trussing, and let’s not forget about fog! But for well over a decade now, I’ve only been using wash lighting. Keep it classy, San Diego! Also, FULLY agree about never turning on lights for the formalities. Uplighting doesn’t count in this instance. But like you said, anything that’s going to light up the dance floor. Not necessary. And likely will ruin first dance pics, F/D dance pics, etc. Yes, RED sucks not only for dancing, but at concerts too. I mean, some death metal bands look good in an all red stage (like blood/hell haha), but for the most part red is the absolute worst. Also many lights now come with wifi APP control. So if you don’t get a lighting controller, at least get lights that have the app control. Great article, and funny that you used that pic of Barry at Spencer’s, because my wife says you remind her of Barry. Not sure if that’s a good thing or not LOL
Loved the article!! Great points. With literally dozens of years in this game, I am still trying to evolve. In my opinion, there is a time and place for everything. More DJs are going to wash effects for weddings and formal gigs. For kid parties and birthday celebrations, I like the moving heads and even the effect lighting. I agree that big effect lighting may not be for the formal stuff, but please note that at a school dance or even less formal birthday gigs, you need more than a few up lights. I’ve have been asked to bring my big lights and mirror ball twice over the last few years. Once for a 50th birthday disco themed party and then for a sweet 16. Go figure. Lol
Great article Nick! Can you walk us through your normal lighting package and how you control the lights? I use a Dotz TPar because it’s 1) only a wash light and 2) I can easily control some aspects of it with a foot petal. I’m nervous to have to bring another laptop and have to switch my lights while I DJ. I’d love to see how you do it when you don’t have a lighting assistant.
You can RENT GEAR!! You don’t have to buy anything! Where I live all DJ equipment other than a laptop and controller can be rented very in expensively. You can also buy lights that can be used as controllers. You don’t HAVE to buy a controller to control all lights. If you buy the right kind of lights you can avoid needing a controller. You’re also wrong about red. I’ve never heard any photographers in 30 YEARS tell me my lights made it difficult to get good pics. Red is one of the most complimentary colors on a person. Saying that I’ve rarely used red for a wedding but for a fast dance having red in the color mix is good. I listen to the client and discuss lighting with the photographer before I use them just in case. The light you want to avoid using is white. I’ve had people ask for white and its bizzare. Why have any lights if they want white? Why not just turn on the venue lights.